Mounting The Radio - Medion MD 87466 - LIFE P83302 Bedienungsanleitung

 Pull the battery holder with the battery out of the remote control. Comply with
the legal requirements when disposing of the used battery.
 Insert a new 3 V CR2025 battery in the holder with the positive terminal facing
upwards. Always make sure the battery is the right way round.
 Push the battery holder complete with battery back into the remote control as
far as it will go.

5.3. Mounting the radio

The under-cabinet radio is for mounting to the underside of a wall cabinet or shelf
unit. To mount the device, you will need 8 screws (included in the delivery). The size
and length of the screws must match the mounting plate and bracket.
 Select a suitable space near a mains socket.
 Remove the cover by pulling it back (in the direction of the arrow) and off the radio.
 Use the mounting bracket or the template to mark the drill holes (1).
 Drill 8 holes on the underside of the shelf unit (where you made your markings)
in order to fix the screws.
 Screw the mounting bracket to the bottom of the cabinet or shelf. Make sure
that UP faces up and FRONT faces to the front.
 Now place the device onto the notch of the mounting bracket and carefully
push the device back until it audibly clicks into place (2).
 Make sure that the wire aerial does not get caught.
CR 2025
DE
FR
NL
EN
155 of 191