Herunterladen Inhalt Inhalt Diese Seite drucken

Overview Of The Components; Before Initial Use; Initial Operation; Using The Unit - Clatronic PP 2914 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für PP 2914:
Inhaltsverzeichnis

Werbung

- in agricultural estates.

Overview of the Components

1 Glass lid with heat-insulated plastic knob
2 Contacts for the thermostat
3 Socket for the thermostat
4 Pan
5 Handle
6 Hot plate
7 Thermostat
8 Temperature sensor, measures the temperature of the
plate
9 Power cord
10 Mains plug
11 Thermostat control

Before Initial Use

1. Remove the appliance from its packaging.
2. Remove all packaging materials such as films, filler mate-
rial, cable clips and carton.
3. Check the contents for completeness.
4. In case of incomplete delivery or damage, do not operate
the device. Return it to your dealer immediately.
5. Operate the appliance without the lid for approximately
5 min on the highest setting (see "Initial Operation").
NOTE:
Any smoke or smells produced during this procedure are
normal. Please ensure sufficient ventilation.
6. We recommend that you clean the lid and the pan as
described under "Cleaning".
7. Rub the non-stick surface lightly with edible oil.

Initial Operation

1. Place the unit on a flat and heat-resistant surface. In the
case of sensitive surfaces please place a heat-resistant
board under the pan.
2. Please ensure that the temperature regulator (11) is turned
to OFF and insert it into the socket (3) of the thermostat.
CAUTION:
If the thermostat (7) is not
inserted correctly, this may
lead to abnormal heating,
of which the consequence
may be damage or acci-
dents. You should therefore
ensure that the thermostat
is inserted correctly.
3. Connect the device to a properly installed power socket.
4. Set the temperature control (11) according to what you
intend to do:
26
Temperature adjust-
Adjustment
ment in °C approx.
MIN-1
2
over 100° C
3-4
150° - 200° C
5
240° C
NOTE:
The device has reached the correct temperature when the
control lamp on the thermostat (7) goes off. During operation
the control lamp goes on from time to time to show that the
correct temperature is being maintained.

Using the unit

The Party Pan should be preheated for approximately five
minutes. When the control lamp goes off, the pan is ready
for operation.
The cooking time depends on the type and quantity of
food that is to be cooked as well as the degree of cooking.
Please base these times on your own experience.
When turning the food that is being cooked, please use
wooden or Teflon utensils so as not to damage the non-
stick layer.
When cooking is finished the food may be kept warm by
turning the controls to MIN.
WARNING:
The Party Pan is hot during use!
Hot steam is emitted from the lid.

After Use

To switch the device off, first turn the temperature regulator to
OFF and remove the plug from the socket. Do not remove the
thermostat from the device until the device has cooled down,
as the temperature sensor is still very hot after use.
Use
Keeping warm
Fried food, hamburg-
ers
Pancakes, scrambled
eggs, ham, bacon
Pizza

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis