Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 40
Installation Condition
Check the input current of the monitor you are using
and use the AC adaptor under the following installation
conditions:
The front side of the AC adaptor here is the opposite side
of the AC IN connector.
When using the adaptor as the power source
for a monitor with an input current below
7.8 A.
Front View
13
> 20 mm (
/
16
> 50 mm
(2 inches)
When installing, leave a space of 50 mm (2 inches) or
more from the left and right sides of the unit, and 20 mm
13
(
/
inches) or more above the unit.
16
Side View
> 20 mm (
> 100 mm
(4 inches)
When installing, leave a space of 100 mm (4 inches) or
more behind the unit.
When using the adaptor as the power source
for a monitor with an input current of 7.8 A
or more.
Front View
> 100 mm (4 inches)
> 100 mm
(4 inches)
When installing, leave a space of 100 mm (4 inches) or
more from the left/right sides of and above the unit.
Side View
> 100 mm (4 inches)
> 100 mm
(4 inches)
When installing, leave a space of 100 mm (4 inches) or
more behind the unit.
inches)
> 50 mm
(2 inches)
13
/
inches)
16
< 50 mm
(2 inches)
> 100 mm
(4 inches)
< 50 mm
(2 inches)

Maintenance

Be sure to disconnect the power cord from the monitor
before performing maintenance. When solvents such as
benzene or thinner; acid, alkaline or abrasive detergent;
or chemical cleaning cloths are used on the AC adaptor
surface, the surface finish may be damaged. Take care
with respect to the following:
Clean the AC adaptor surface with a 50 to 70 v/v%
concentration of isopropyl alcohol or a 76.9 to 81.4 v/
v% concentration of ethanol.
Stubborn stains may be removed with a soft cloth such
as a cleaning cloth by lightly dampening with mild
detergent solution and then cleaning using the above
chemical.
Do not use unnecessary force to rub the AC adaptor
surface with a stained cloth. The AC adaptor surface
may be scratched.
Do not keep the AC adaptor surface in contact with a
rubber or vinyl resin product for a long period of time.
The surface finish may deteriorate or the coating may
come off.
Installation Condition / Maintenance
11
GB

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis