Maintenance; Specifications - Sony AC-120MD Gebrauchsanweisung

Maintenance

Be sure to disconnect the power cord from the monitor
before performing maintenance. When solvents such as
benzene or thinner; acid, alkaline or abrasive detergent;
or chemical cleaning cloths are used on the AC adaptor
surface, the surface finish may be damaged. Take care
with respect to the following:
Clean the AC adaptor surface with a 50 to 70 v/v%

concentration of isopropyl alcohol or a 76.9 to 81.4 v/
v% concentration of ethanol.
 Stubborn stains may be removed with a soft cloth such
as a cleaning cloth by lightly dampening with mild
detergent solution and then cleaning using the above
chemical.
Do not use unnecessary force to rub the AC adaptor

surface with a stained cloth. The AC adaptor surface
may be scratched.
 Do not keep the AC adaptor surface in contact with a
rubber or vinyl resin product for a long period of time.
The surface finish may deteriorate or the coating may
come off.

Specifications

Power AC IN: 100 V-240 V, 50/60 Hz, 2.5 A-
1.0 A
DC OUT: 24 V 6.25 A
Operating conditions
Temperature
0 °C to 35 °C (32 °F to 95 °F)
Humidity 30% to 85% (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Humidity 20% to 90%
Pressure 700 hPa to 1060 hPa
Dimensions Approx. 170 × 40 × 85 mm (w × h × d)
3
(6 / × 1
4
Mass 1.2 kg (2 lb 10 oz)
Accessories supplied
Instructions for Use (1)
Service Contact List (1)
European Representative (1)
Design and specifications are subject to change without
notice.
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of water:
Ordinary
Degree of safety in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous
oxide:
Not suitable for use in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous
oxide
Mode of operation:
Continuous
5 3
/ × 3 / inches)
8 8
Maintenance / Specifications
9
GB