Pioneer DEH-2400UB Bedienungsanleitung Seite 3

Operating this unit
Head unit
DEH-3400UB
12 3 4 5 6
7 8 9 a b c de
Part Part
1 8
h (eject) (back/display)
2 9
(list) c/d
MULTI-CONTROL BAND/
(iPod
3 a
(M.C.) control)
4 SRC/OFF b 1 to 6
5 Disc loading slot c PTY
AUX input jack
6 d
USB port (3.5 mm stereo
jack)
7 e
(color) Detach button
DEH-2400UB
12 3 4 5 6
7 8 9 a b c de
Part Part
1 8
h (eject) (back/display)
2 (list) 9
c/d
Part Part
MULTI-CONTROL BAND/ (iPod
3 a
(M.C.) control)
4 b
SRC/OFF 1 to 6
5 c
Disc loading slot PTY
AUX input jack
6 d
USB port (3.5 mm stereo
jack)
7 e
Detach button
CAUTION
! Use an optional Pioneer USB cable (CD-
U50E) to connect the USB audio player/USB
memory as any device connected directly to
the unit will protrude out from the unit and
may be dangerous.
! Do not use unauthorized products.
Display indication
1
3 5 7 8 9
2 4 6
Operating this unit
Indicator State
! Tuner: band and frequency
! RDS: program service
name, PTY information and
Main dis-
other literal information
1
play sec-
! Built-in CD, USB storage
tion
device and iPod: elapsed
playback time and text in-
formation
The list function is being oper-
2
(list)
ated.
3 LOC
Local seek tuning is on.
4
(TA) TA function is on.
5 (TP) A TP station is tuned in.
(re-
6 Track or folder repeat is on.
peat)
Random play is on.
(ran-
The iPod source is selected
7
dom/shuf-
and the shuffle or shuffle all
fle)
function is on.
The sound retriever function is
8
(sound re-
on.
triever)
(iPod This unit's iPod function is op-
9
control) erated from your iPod.
Set up menu
When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
You can set up the menu options below.
1 After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2 Turn M.C. to switch to YES. Press M.C. to
select.
# If you do not operate for 30 seconds, the set up
menu will not be displayed.
# If you prefer not to set up at this time, turn M.C.
to switch to NO. Press to select.
If you select NO, you cannot set up in the set up
menu.
3 Perform the following procedures to set
the menu.
To proceed to the next menu option, you need to
confirm your selection.
CLOCK SET (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
FM STEP (FM tuning step)
Normally, the FM tuning step employed by seek
tuning is 50 kHz. When AF or TA is on, the tuning
step automatically changes to 100 kHz. It may be
preferable to set the tuning step to 50 kHz when
AF is on.
! The tuning step remains at 50 kHz during man-
ual tuning.
1 Turn M.C. to select the FM tuning step.
50 (50 kHz)—100 (100 kHz)
2 Press M.C. to confirm the selection.
DEMO (demo display setting)
1 Turn M.C. to set the demo display to on or off.
2 Press M.C. to confirm the selection.
Section
02
3
En