Restore Factory Settings; Maintenance And Cleaning - HomeMatic HmIP-DRSI4 Installations- Und Bedienungsanleitung

8

Restore factory settings

The factory settings of the device can be restored.
If you do this, you will lose all your settings.
To restore the factory settings of the device, proceed as
follows:
Press and hold down the system button (A) for 4
•
seconds until the LED (A) quickly starts flashing
orange (see figure 13).
• Release the system button again.
• Press and hold down the system button again
for 4 seconds, until the LED lights up green (see
figure 14).
• Release the system button to finish the procedure.
The device will perform a restart.
9

Maintenance and cleaning

The product does not require any maintenance.
Enlist the help of an expert to carry out any main-
tenance or repairs.
The mains voltage must be disconnected before
the device is removed (trip the miniature cir-
cuit-breaker). Only qualified electricians (to VDE
0100) are permitted to carry out work on the
230 V mains.
Restore factory settings
55