Operation - HomeMatic HmIP-DRSI4 Installations- Und Bedienungsanleitung

• Wait until the connection is completed.
• If connecting was successful, the LED (A) lights
up green. The device is now ready for use.
• If the LED lights up red, please try again.
• Select the desired solution for your device.
• In the app, give the device a name and allocate
it to a room.
6

Operation

Via the following push-buttons, simple operating func-
tions are available directly on the device:
System button (A)
•
Channel button (B)
•
• Select button (C)
External push-button/switch (H)
•
System button
By pressing the system button briefly (see figure 10), you
can activate the LCD background light.
Channel button
By pressing the channel button briefly (see figure 11), you
can select the desired channel. With each button press,
you can switch to the next channel.
The selected channel is indicated by the flashing symbol.
The current state of the selected channel (0 or 100 %) is
indicated on the display.
Operation
51