Information; Symbols Used; General Information; Delivery - Bosch VLE 2130 E Erstinbetriebnahme

en 12 | VLE 2130 E | Symbols used
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible.
DANGER – Exposure of live parts on
opening the VLE 2130 E!
Risk of (fatal) injury or heart failure
from electric shocks on contact with live
components (e.g. master switch, printed
circuit boards).
¶
Work on electrical installations or
equipment is only to be performed by
qualified electricians or trained personnel
under the guidance and supervision of an
electrician.
¶
Disconnect the VLE 2130 E from the mains
Disposal
before opening.
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
The carrying of persons on the support arms
or in the vehicle is prohibited.
Notes on load distribution
If the gross weight of a vehicle corresponds to the
maximum loadbearing capacity, the load distribution
ratio between the long and short support arms must
not exceed 3 : 2, i.e. one pair of support arms is not
to be loaded with more than 60 % of the maximum
loadbearing capacity (for VLE 2130 E 1800 kg).
Maintenance schedule
Refer to "Original instructions" Section 8 for component
maintenance and intervals.
|
1 689 978 551 2017-11-17
2.

General information

2.1

Delivery

A fork lift truck must be available.
Weight of lifting platforms: approx. 600 kg.
2.2

Installation by third parties

These installation instructions and the information
given in the original operating instructions provided
must always be heeded. If the lifting platform is
not erected by Bosch customer service or a service
agent authorized by Bosch, the lifting platform must
subsequently be subjected to safety acceptance by
Bosch customer service or a service agent authorized
by Bosch.
Safety acceptance involves the following:
R
Electrical functional test and trial run as per
BGG 945.
R
Examination of the individual assemblies and
components.
R
Test log book entry as per BGG 945-1.
R
Personnel instruction (safety and operation).
i
Failure to conduct such safety acceptance will
render all warranty claims and liability invalid.
2.3 Annual inspection by qualified person
(UVV)
In addition to checking by our customer service prior
to initial commissioning of the lifting platform, official
regulations demand safety acceptance by a qualified
person at least once per year. Bosch customer service
or a service agent authorized by Bosch will be pleased
to submit a quotation for a maintenance agreement.
2.4

Warranty

As lifting platforms have to satisfy exacting safety
requirements to protect the personnel working with
them, it should be noted that the acknowledgement of
warranty claims is subject to the performance of proper
safety acceptance, maintenance work and recording
in the test log book. Exclusive use is to be made of
genuine Bosch replacement parts, as the fitting of parts
from other manufacturers invalidates the type approval
and any warranty claims.
Robert Bosch GmbH