Operation - BWT Infinity A Einbau- Und Bedienungsanleitung

Set Set
Set Press Set Set
Wait 10 sec. Dots stop flashing.
Set Set Set Set Set
The pressure appears in the display
0.0 P 0.0 P
0.0 P 0.0 P, when no water is used. 0.0 P
A third filter must be set to SL 2
Disconnect and reconnect all filters to the mains.
The filters will be backwashed in sequence: Master
SL 1, SL 2 SL 1 SL 1 SL 1 SL 1 SL 2 and SL 3 SL 2 SL 2 SL 2
The time until the next backwashing time until the next backwashing time until the next backwashing time until the next backwashing and the pres- time until the next backwashing
sure difference appear alternately in the master sure difference sure difference
sure difference sure difference
filter display. The pressure difference is only dis-
played for large volumes of water.
Only the pressure difference Only the pressure difference
Only the pressure difference Only the pressure difference Only the pressure difference appears in the slave
filter display.
The filters are ready for use.

Operation

Operation
Operation Operation Operation
We recommend programming the filter so that the We recommend programming the filter so that the We recommend programming the filter so that the We recommend programming the filter so that the We recommend programming the filter so that the
device is backwashed at least once a month to device is backwashed at least once a month to
device is backwashed at least once a month to device is backwashed at least once a month to device is backwashed at least once a month to
prevent foreign particles from adhering to the filter prevent foreign particles from adhering to the filter prevent foreign particles from adhering to the filter prevent foreign particles from adhering to the filter prevent foreign particles from adhering to the filter
element (more frequently for higher levels of element (more frequently for higher levels of
element (more frequently for higher levels of element (more frequently for higher levels of element (more frequently for higher levels of
soiling; factory setting every 7 days). soiling; factory setting every 7 days). soiling; factory setting every 7 days). soiling; factory setting every 7 days). soiling; factory setting every 7 days).
Setting the backwash interval Setting the backwash interval Setting the backwash interval Setting the backwash interval Setting the backwash interval
see Starting the unit
Manual backwashing Manual backwashing Manual backwashing
Manual backwashing Manual backwashing
Unplugging and plugging in the device can back-
wash it at any time.
Display Display Display Display Display
displays the time until the next backwashing.
Infinity AP only Infinity AP only
Infinity AP only Infinity AP only Infinity AP only
The time until the next backwashing time until the next backwashing time until the next backwashing and the pres- time until the next backwashing time until the next backwashing
sure diff sure difference sure diff
sure diff sure diff
pressure difference is only displayed for large vol-
umes of water.
When operating in parallel, the slave filter only dis-
plays the pressure difference.
Cleaning Cleaning Cleaning Cleaning Cleaning
Clean plastic parts with a soft, damp cloth only; do
not use solvents, detergents, or acidic cleaning
agents.
SL 1 SL 1
SL 1 SL 1 SL 1
SL 2 SL 2
SL 2 SL 2 and a fourth to SL 3
SL 3 SL 3 SL 3. SL 3
erence erence are displayed alternately. The erence
erence
GB GB GB GB GB
SL 3 SL 3
SL 3. SL 3
Master Master
Master, Master
pres- pres- pres- pres-
pres- pres- pres- pres-
1 9 1 9 1 9 1 9 1 9