Switching The Alarm On/Off; Operations While The Alarm Sound Is Playing - Yamaha TSX-132 Bedienungsanleitung

USING THE ALARM FUNCTION

Switching the alarm on/off

Operations while the alarm sound is playing

When the set time arrives, the selected alarm sound will play. During playback, the following operations are available.
To pause the alarm (Snooze)
To turn the alarm off
14
En
Press ALARM to turn the alarm on/off.
When the alarm is on, the alarm indicator (
light, and the alarm time will be shown.
If you press ALARM again, the alarm indicator (
and the alarm will turn off.
When the unit is in power saving, the alarm will not function
(☞ P. 5).
Press SNOOZE/SLEEP.
Snooze will stop the alarm and play it again 5 minutes
later.
If SOURCE + BEEP is set as the alarm type, you can press
SNOOZE/SLEEP once to stop the beep sound, and twice to
stop the audio source.
Five minutes after the audio source is stopped, it will start fading
in again and the beep sound will resume.
Press ALARM or
• You can also stop the alarm by holding down SNOOZE/
SLEEP.
• If you don't stop the alarm, it will stop automatically after 60
minutes and the system will turn off.
• The alarm setting will be saved even if the alarm is turned off.
If the alarm is turned on again by pressing ALARM, the alarm
will sound with the previous alarm settings.
) will
.
)