Bt Connection And Playback; Aux In - auna Birmingham Bedienungsanleitung

Important notes
• The automatic return system is mechanically designed and the reset
point can be influenced by the transport. Therefore, the tonearm may
automatically return to the holder the first time it is placed on the
record. This is not a malfunction.
• The length of the record can vary. If you notice that the tonearm cannot
return automatically after the record has been played, please return the
tonearm to the rest position manually or set the automatic return point.

BT CONNECTION AND PLAYBACK

1. Press the MODE button (15) to select the BT mode.
2. Press the OK button to confirm.
3. The BT icon will blink on the LCD screen, indicating that the BT
connection has not yet been established.
4. Activate BT on your mobile device and select „Birmingham" in the
device list.
5. Once the connection has been successfully established, the BT icon will
light up permanently on the LC screen.
6. Start playback on your mobile BT device and enjoy music playback via
your device.

AUX IN

Connect another audio device, such as a portable CD player, MP3 player,
cassette player, iPod, etc., to the aux-in port on the side of the device using
a 3.5 mm connection cable (not supplied). Press the MODE button to select
Aux In mode and press the OK button to start playback.
EN
39