Klarstein Eclipse Bedienungsanleitung Seite 18

EN
18
Upper
chimney
Lower
chimney
When the desired height is reached, place the mounting hole on the wall bracket on
the bracket as shown in the picture.
Wall plug
Wall bracket
Drill 2 × 8 mm holes for the wall bracket. Fix the wall bracket to the wall with 2 plugs
and 2 screws. Then fix the chimney to the wall bracket with 2 screws.
4
Place the upper chimney in the lower
chimney and then pull the upper chimney
upwards to the desired height.
5
6
Screw
(4 mm x 8 mm)
Screw
(4 mm x 30 mm)