Technical Data - H-tronic HTDC 5000 Anleitung

The innovation for charging, maintaining & testing lead batteries
3-in-1 multifunctional charger
HTDC 5000
GB
Regular charging isn't sufficient in order to give a battery constant effectiveness
and a long lifetime. It needs more: a custom­made charging process, effective
care and permanent supervision of all functions. The new 3­in­1­multifunctional
charger HTDC 5000 meets all these demands in an optimal way: Small in size, but
large in performance – a perfect hightech service center for all 12 V lead batteries
in cars, golf carts, motorcycles, scooters or quads which should work reliably.
 3-in-1 charging: Microprocessor-controlled
and characteristic-curve-controlled charging
tech nology and state-of-the-art software control
and monitor, in a fully automatic fashion, the
best charging sequence depending on the state
of charge. The battery can remain connected for
months. Overcharging is not possible.
 3-in-1 maintenance: The sulphate deposits in
the battery are reduced by an activator, a piece of
hardware specially developed to perform this task.
This guarantees a long service life for the battery.
 3-in-1 testing: Permanent testing and
diagnostic facility. All of the important information
about the battery – current charging current,
charging voltage and state of charge – can be
called up on an LC display and indicated by eight
colour LEDs. Integrated protective circuits ensure
that the charger is safe to operate.
12

Technical data:

 Operating voltage: 230 V/50 Hz
 Power consumption: max. 80 VA
 Temperature range for use: –15°C to +40°C
 Housing with integrated carrying handle
 T he charging current can be selected via push
buttons to be between max. 1 A for motorbike
batteries (from 5 to 15 Ah) and max. 2.5 A for
golf carts etc. (15 to 30 Ah) and 5 A for car
batteries (from 30 to 100 Ah), temperature
range for use –15°C to +40°C
3-in-1 multifunctional charger
Art. No. 1 24 25 00