Maintenance Advice - Panerai RADIOMIR 1940 3 DAYS Gebrauchsanleitung

INSTRUCTIONS FOR USE
PANERAI RADIOMIR 1940 3 DAYS ACCIAIO
W
INDING THE WATCH
1. Unscrew the winding crown (A) without pulling it out (position 0) and turn
it clockwise. When the crown stops, the watch is fully wound.
2. Screw the winding crown (A) down again.
S
ETTING THE TIME
1. Unscrew the winding crown (A) and pull it out to the second click (position
2).
2. Set the correct time.
3. Push back the winding crown (A) to the initial position (0) and screw it down
again.
For a rapid change of the time, pull out the winding crown (A) to the first click
(position 1). In this position the hour hand (B) moves forwards or backwards
in steps of one hour without moving the minute hand (C).
R ,
EPLACING THE BUCKLE THE STRAP AND THE METAL BRACELET
The screwdriver supplied with your watch enables the buckle, the strap and
the metal bracelet to be replaced easily.
The replacement of the strap, the metal bracelet and the buckle of your watch
must be carried out by an Authorized Distributor or a Panerai Service Centre,
in order to avoid any problems caused by incorrect replacement.
(
FOR SOME MODELS ONLY
14

MAINTENANCE ADVICE

Panerai watches are produced according to very high standards of quality. It
is worth remembering that the mechanical parts run 24 hours a day when
used, so the watch must undergo regular maintenance to ensure long life and
good operation.
W -
ATER RESISTANCE
Have your watch checked periodically for water-resistance by an Authorized
Panerai Service Centre and restore it every two years with regular servicing, or
whenever the watch has to be opened.
Restoring the watch's water-resistance necessarily involves replacing the
seals so as to ensure the maximum water-resistance and security.
Where the watch is used in underwater sports activities, it is recommended
that it should be checked every year before the season of underwater activities
begins.
T
HE MOVEMENT
Have the movement of your watch checked periodically by an Authorized
Panerai Service Centre so as to maintain its perfect operation. If the watch
)
tends to gain or lose time significantly, the movement may need to be
overhauled.
The movements are designed to withstand temperature variations between
-10°C and +60°C (14°F and 140°F). Outside this range of temperatures,
operational variations exceeding those set out in the specifications of the
movement may be noticed. In addition, there is a risk that the lubricants
contained in the movement may deteriorate, resulting in damage to some of
its parts.
C
LEANING THE EXTERIOR
To keep the exterior in perfect condition, we recommend washing your Panerai
15