Introduction; Installation Checklist - HP LaserJet 9040/9050 Leitfaden Zur Inbetriebnahme

Introduction

Congratulations on your purchase of the HP LaserJet 9040/9050 printer. This series of printers is
available in the following configurations.
HP LaserJet 9040/9050 printer
The HP LaserJet 9040/9050 printer (product number Q7697A/Q3721A) comes standard with
64 megabytes (MB) of random-access memory (RAM), wide-format printing, and two 500-sheet
trays.
Note Only the HP LaserJet 9040/9050 printer requires an optional enhanced input/output
(EIO) card to connect to a network.
HP LaserJet 9040n/9050n printer
The HP LaserJet 9040n/9050n printer (product number Q7698A/Q3722A) comes standard with
128 MB of RAM, wide-format printing, two 500-sheet trays, a 100-sheet multipurpose tray
(Tray 1), and an embedded HP Jetdirect print server.
HP LaserJet 9040dn/9050dn printer
The HP LaserJet 9040dn/9050dn printer (product number Q7699A/Q3723A) comes standard
with 128 MB of RAM, wide-format printing, two 500-sheet trays, a 100-sheet multipurpose tray
(Tray 1), an embedded HP Jetdirect print server, and a duplex printing accessory (for printing on
both sides of paper).

Installation checklist

This guide will help you set up and install your new printer. For correct installation, please
complete each section in order:
WARNING! The printer is heavy. HP recommends that four people move it to avoid injury to you and damage
to the printer.
4 Printer Setup
Unpack the printer
Install the printer
Install printing software
Verify printer setup
steps 1-4
steps 5-13
step 14
step 15
ENWW