Install Printing Software; Installing Windows Printing Software; Installing Macintosh Printing Software - HP LaserJet 9040/9050 Leitfaden Zur Inbetriebnahme

Step 14. Install printing software
The printer comes with printing software on a CD-ROM. The printer drivers on this CD-ROM
must be installed to take full advantage of the printer features.
If you do not have access to a CD-ROM drive, you can download the printing software from the
Internet at www.hp.com/support/lj9050_lj9040. Depending on the configuration of Windows-
driven computers, the installation program for the printer software automatically checks the
computer for Internet access and provides an option to obtain the latest software from the
Internet.
Note Printer installation software for UNIX
at www.hp.com/support/net_printing.
See the HP support flyer for more information.

Installing Windows printing software

This section describes how to install Windows printing software. The software is supported on
Microsoft
Windows XP, and Windows Server 2003.
To install the software
1
2
3

Installing Macintosh printing software

This section describes how to install Macintosh printing software. The software is supported on
Macintosh OS 7.5 or higher.
To install Macintosh printing software for Mac OS 8.6 to 9.2
1
2
3
4
5
6
7
8
24 Printer Setup
 
Windows 9X, Windows NT
Quit all running programs.
Insert the CD-ROM into the CD-ROM drive. Depending on the computer configuration, the
installation program may automatically run. If the program does not run automatically: On the
Start menu, click Run. Type x:setup (where X is the letter of the CD-Rom drive), and click
OK.
Follow the instructions on the computer screen.
Connect the network cable between the HP Jetdirect print server and a network port.
Insert the CD-ROM into the CD-ROM drive. The CD-ROM menu runs automatically. If the
CD-ROM menu does not run automatically, double-click the CD-ROM icon on the desktop,
and then double-click the Installer icon. This icon is located in the Installer/<language> folder
of the Starter CD-ROM (where <language> is your language preference). For example, the
Installer/English folder contains the Installer icon for the English printer software.
Follow the instructions on the computer screen.
Open the Apple Desktop Printer Utility located in the (Startup Disk): Applications: Utilities
folder.
Double-click Printer (AppleTalk).
Next to Apple Talk Printer Selection, click Change.
Select the printer, click Auto Setup, and then click Create.
On the Printing menu, click Set Default Printer.

(HP-UX, Sun Solaris) networks is available for download

4.0, Windows 2000, Windows Millennium (Me),
ENWW