Cleaning And Care - Optimum CJ-6240 Bedienanleitung

• As soon as the water reaches boiling point, the 0/1 switch
return automatically to the '0' position. The indicator lamp
will go out. The water kettle can also be switched off
manually by putting the 0/1 switch to the '0' position.
• The hot water may now be poured safely through the spout
into another container.
Safety cut-out
• This kettle is equipped with a safety cut-out to protect
the appliance from damage in case of unappropriate use.
Should the appliance be accidentally operated without
water, or if all the water has evaporated, the safety cut-out
will automatically switch off the heating element
• In such a case, remove the plug from the wall socket
immediately and refill the kettle only after an adequate
cooling down period. About 15-20 seconds.
Decalcifying
• Should the appliance switch off before reaching boiling
point. This is a sign that decalcifying is necessary
• Any regular descaling agent may be used, provided the
relevant instructions are observed. Do not fill the kettle
to the upper mark to avoid spillage if the descaling agent
causes the water to foam.
• To clean the kettle thoroughly of any decalcification
residues, let it go through several boiling cycles, using clean
water with each cycle. Rinse the kettle with clean water
afterwards.

CLEANING AND CARE

• Before cleaning the appliance, ensure it is disconnected
from the power supply and has cooled down completely.
• Do not use abrasives or harsh cleaning solutions.
• Do not immerse the base or the kettle in any liquid, To clean
the exterior, a slightly damp, lint-free cloth may be used
• It is advisable to remove lime deposits form the kettle at
regular intervals.
Technical Parameters:
Supply voltage: 220-240V~ 50-60Hz
Power consumption: 1850-2200W
Capacity: 1.7L
6
Ecology – Environmental Protection
The "crossed-out trash bin" symbol on electrical
equipment or packaging indicates that the device
cannot be treated as general household waste and
should not be disposed of into containers for such waste.
Obsolete or broken-down electrical device should be
delivered to special designated collection points, organized by
local public administration, whose purpose is to collect recy-
clable electrical equipment.
This way, each household helps reduce possible negative
effects influencing natural environment and allows the
reclaiming of materials which the product is made of.
e
Weight: 0.85kg