Electrolux EK260BR Benutzerinformation Seite 61

6. Remove the pins from each of the hinge brackets, transfer to
the other hinge bracket and tighten.
This hinge bracket will later be
mounted at the bottom on the
left, as described in point 15.
7.
7. Unscrew the top attachment
bracket.
8. Remove the retaining bracket and
6.
This hinge bracket will later be
mounted at the top on the left,
as described in point 11.
8.
transfer to the opposite side.
9. Screw on the top attachment
bracket.
Note
Screw in the screws, push the bracket to the left as far as it will
go, then tighten the screws.
Note
Screw in the screws, push the bracket to the left as far as it will
go, then tighten the screws.
11.
11. Screw on the top hinge
bracket.
9.
10.
10. Transfer the bottom attach-
ment bracket to the opposite
side.
GB
61