Linea 2000 Domo DO7106S Gebrauchsanleitung Seite 34

PARTS
1. Filling cap
2. Trigger for removing the water tank
3. Handle
4. Water tank
5. Steam release button
6. Soleplate
7. Temperature dial
8. Temperature indicator
9. Iron
10. Thermal insulation pads
11. Steam generator
12. Control panel
13. Cord clamp
14. Descaling cartridge
Trigger
Grab the water tank by the handle and pull the trigger. You can now remove the water tank
from the generator.
Filling cap
Open the filling cap and use the opening to fill the water tank.
On/off button (A)
Plug in the appliance and press the on/off button. The
on/off indicator (B) will light up. The appliance is now
switched on. To turn the appliance off again, press the
on/off button and hold. The indicators will go out and
the appliance is now switched off.
Temperature indicator
When the iron is heating up, the temperature indicator will be lit up. When the set
temperature has been reached, the light indicator will go out again. During ironing the
indicator will alternately light up and go out again, as the iron is being kept at the right
temperature.
Steam light (C)
When you turn on the device, the steam light will remain unlit. As soon as the device has
34
DO7106S
3
1
2
4
14
5
6
11
13
A
B
7
8
9
10
12
C