Manual Adjustment; Electronic Adjustment; Use Of Dishwasher Salt - Zanussi zdt431 Benutzerinformation

°dH °TH
23 - 28 40 - 50
19 - 22 33 - 39
15 - 18 26 - 32
11 - 14 19 - 25
4 - 10 7 - 18
< 4 < 7
1) No use of salt required.
You must set the water softener manually and elec-
tronically.

Manual adjustment

The appliance is set at the factory at position 2.
1

Electronic adjustment

The dishwasher is factory set at level 5.

Use of dishwasher salt

Caution! Only use dishwashers salt. Types of salt
that are not applicable for dishwashers cause
damage to the water softener.
24
Water hardness
mmol/l
4,0 - 5,0
3,3 - 3,9
2,6 - 3,2
1,9 - 2,5
0,7 - 1,8
< 0,7
2
Set switch to position 1 or
2.
Clarke manually
28 - 35 2
23 - 27 2
18 - 22 1
13 - 17 1
5 - 12 1
< 5 1)
1
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons B and C until the
indicator lights of function buttons A, B and C start
to flash.
4. Release function buttons B and C.
5. Press function button A.
– The indicator lights for function buttons B and C
go off.
– The indicator light for function button A continues
to flash.
– The digital display shows the current level.
– You can hear an audible signal.
Example: digital display shows
audible signals = level 5.
6. Press the function button A one time to increase the
water softener level by one step.
7. Press the on/off button to save the operation.
1
Water hardness setting
electronically
6
5
4
3
2
1)
1
/ 5 intermittent
2