Display Alarms - VLX 818R Bedienungsanleitung

Error code
PAUSE MOTOR
PAUSE DRIVE
BRUSH CURRENT
BATTERY RESERVE
BATTERY
DISCHARGED
BATTERY
EXHAUSTED
BRUSH WORN

DISPLAY ALARMS

Machine behaviour
Drive stops
Drive stops
The working functions
are disabled
This is simply a
warning that the
battery charge is
getting low
The machine's
functions are stopped,
excluding drive
The machine stops
The machine
continues working
Description of the
problem
Drive motor
overtemperature >
95°C.
Alternator
overtemperature >
150°C
Electronic
control circuit
overtemperature >
85°C
Excess current or
centre brush blocked
It is shown when the
battery voltage falls
below 21.3V
If the voltage read
falls below 20.3V
for 3 seconds
consecutively
If the voltage read
falls below 18V
for 3 seconds
consecutively
The brush is no
longer able to apply
because it is worn
EN
Possible solution
If having driven up a
slope this may can be
normal, let the motor
cool down for 20
minutes.
Check that the brake
is not locked.
Check that the front
wheel turns freely.
If the air temperature
is high, stop the
machine for 20
minutes, then start
again. If the problem
remains, contact a
service centre.
Check free brush
movement or for
the presence of any
impediments (ropes,
plastic and so on)
No action needed,
except to charge the
battery
Charge the battery
Charge the battery
Replace the centre
brush
19