Electrical Installation - Zanussi ZSC25259 Benutzerinformation

ELECTRICAL INSTALLATION

WARNING! Only a qualified person
must do the electrical installation.
The manufacturer is not responsible if
you do not follow the safety
precautions from the chapter "Safety
Information".
This microwave is supplied with a main cable and
main plug.
The cable has an earth wire with an earthing plug.
The plug must be plugged into an outlet that is
properly installed and earthed. In the event of an
electrical short circuit, earthing reduces the risk of
electric shock.
INSTALLING THE MICROWAVE
1. Check if the dimensions of the furniture meet
the installation distances.
C
D
A
B
Installation distances
Dimension
A
B
C
D
2. Put the template on the bottom of cabinet and
check if it fits. If yes, mark the spots for screws.
Remove the template and fix the bracket with
the screws (A) in the marked spot.
32
mm
450 + 2
560 + 8
550
45
A
3. Install the microwave. If you fixed the bracket,
make sure it locks the back of the appliance.
4. Open the door and fix the microwave to the
cabinet with a screw (B).
B
=
=