Automatic Programmes - Zanussi ZSC25259 Benutzerinformation

1. Press and set the defrosting mode.
2. Turn the Setting knob to set the defrosting time
or weight.
3. Press to confirm.
4. Turn the setting knob to set the power level.
5. Press to confirm.
6. Turn the Setting knob to set the time.
7. Press to confirm and activate the
microwave.
After each step an acoustic signal sounds.
CONVECTION COOKING
For better result preheat the microwave to the right
temperature before inserting the food.
1. Repeatedly press
2. Turn the Setting knob to set the temperature.
3. Press to confirm.
4. Press again to activate the preheating.
When you hear an acoustic signal, the
temperature is set and flashes on the display.

AUTOMATIC PROGRAMMES

WARNING! Refer to Safety chapters.
AUTO COOKING
Use this function to easily cook favourite food. The
microwave automatically sets the optimum settings.
Menu
A1
Reheat
A2
Potato
A3
Meat
to set function.
150 g
250 g
350 g
450 g
600 g
1 (about 230 g)
2 (about 460 g)
3 (about 690 g)
150 g
300 g
450 g
600 g
Skip this step to cook without preheating.
5. When the preheating ends put in the food.
6. Turn the Setting knob to set the time.
You can input the cooking time only when the
microwave is preheated. If you do not input the
cooking time in 5 minutes, 5 acoustic signals
sound and the microwave activates standby
mode.
7. Press
microwave.
GRILLING AND COMBI COOKING
1. Press .
2. Turn the Setting knob to set the desired
function
3. Press
4. Turn the Setting knob to set the time.
5. Press
microwave.
You can change the power setting or time,
while the Grilling or Combi cooking mode is
active.
1. Turn the Setting knob clockwise to choose the
desired menu.
2. Press
3. Turn the Setting knob to set the weight of the
menu.
4. Press
microwave.
Weight
to confirm and activate the
to confirm.
to confirm and activate the
to confirm.
to confirm and activate the
Approximate percentage of
power
100%
100%
100%
27