Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance - Marta MT-4301 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für MT-4301:
Inhaltsverzeichnis

Werbung

WARM UP
If you need cooked meal to be warmed up press button
DELAY
Use this function to delay time of cooking process start. Press button
for minutes. Press start
(if cooking program is already chosen) or "Menu"
Note: Delay function is not available in following cooking programs: "Fry/Жарка", "Cake/Выпечка", "Omelette/Омлет", "Pilaw/Плов".
Note: Don‟t leave products in the multicooker pot for time more than 12 hours – some products could spoil. Please mind product features when you plan delay time.
PROGRAM CANCEL
Press button
to cancel selected program or settings.
TROUBLESHOOTING
Case
The multicooker doesn‟t switch on
Dish is not cooked in time
Meal is burnt
Display shows E1-E4

CLEANING AND MAINTENANCE

 Always unplug the appliance before cleaning.
 Let the appliance cool down completely.
 Wash the pot using detergent, rinse with water and dry with soft material.
 Do not use dishwasher for inner pot washing.
 Do not use chemical and abrasive cleaners for washing the appliance and accessories.
 Do not put the pot into cold water right after cooking. Let the pot cool down. Do not place very cold products on hot surface.
 CAUTION: do not let water get inside the appliance.
 Clean the appliance housing if required with warm water and soft material, do not use any chemical and abrasive cleaners or dish washing detergent.
 Clean the steam valve after cooking. Detach it carefully. Rinse with running water, dry and set back.
and button
(without any cooking program selection). Indication above keep warm will be on and the multicooker will start warming up meal.
. Display shows indication
to choose the program.
Cause
There is no incoming power
There is no incoming power
The pot is set unevenly
Heating plate is dirty
There is a strange object between the pot and heating plate
Liquid and cereals disproportion
System error
and time
starts flashing. Set up necessary time with buttons
Check power
Check power
Set the pot evenly
Unplug the appliance and let it cool. Clean the heating plate.
Remove the object
Follow recommended proportions
Contact authorized service center.
16
for hours
Solution

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Mt-4308

Inhaltsverzeichnis