Cleaning And Maintenance - Marta MT-4301 Bedienungsanleitung

WARM UP
If you need cooked meal to be warmed up press button
DELAY
Use this function to delay time of cooking process start. Press button
for minutes. Press start (if cooking program is already chosen) or
PROGRAM CANCEL
Press button to cancel selected program or settings.
TROUBLESHOOTING
Case
Dish is not cooked in time
Meal is burnt
Display shows E1-E4

CLEANING AND MAINTENANCE

Always unplug the appliance before cleaning.
Let the appliance cool down completely.
Wash the pot using detergent, rinse with water and dry with soft material.
Do not use dishwasher for inner pot washing.
Do not use chemical and abrasive cleaners for washing the appliance and accessories.
Do not put the pot into cold water right after cooking. Let the pot cool down. Do not place very cold products on hot surface.
CAUTION: do not let water get inside the appliance.
Clean the appliance housing if required with warm water and soft material, do not use any chemical and abrasive cleaners or dish washing detergent.
Clean the steam valve after cooking. Detach it carefully. Rinse with running water, dry and set back.
and button (without any cooking program selection). Indication above keep warm will be on and the multicooker will start warming up meal.
. Display shows indication
to choose the program.
some products could spoil. Please mind product features when you plan delay time.
Cause
There is no incoming power
There is no incoming power
The pot is set unevenly
Heating plate is dirty
There is a strange object between the pot and heating plate
Liquid and cereals disproportion
System error
and time starts flashing. Set up necessary time with buttons
e/
Check power
Check power
Set the pot evenly
Unplug the appliance and let it cool. Clean the heating plate.
Remove the object
Follow recommended proportions
Contact authorized service center.
16
for hours
Solution