Overheating Protection; Technical Specifications - Vitek VT-2533 VT Betriebsanweisung

to keep the hair volume we recom-
–
mend applying fixative lotion or hairspray
upwards, lifting the hair locks.
•
With this styling set you can create various
types of curls and locks, using your imagina-
tion and creating different hairstyles!
• Hair spray should be applied only after hair
styling is finished.
•
After the hot air styler operation is finished,
switch it off by setting the switch (4) to the «0»
position and unplug it.
• Place the unit on a flat heat-resistant surface
and let it cool down completely.
Notes:
During breaks in operation place the unit on
a flat heat-resistant surface.
Avoid contact of heated surfaces of the unit
with your face, neck and other open parts of
your body.
Do not comb your hair right after styling, let
it cool off. Carefully divide the locks with your
fingers to make the hair style look naturally.
Do not block the air inlet grid during the use
of the hot air styler.
Avoid getting of hair into the air inlet grid dur-
ing operation of the unit.

OVERHEATING PROTECTION

This hot air styler has automatic protection from
overheating which will switch the unit off if the
outgoing air is too hot. If the hot air styler is
switched off during operation, switch it off with
the switch (4) by setting the switch (4) to the «0»
position, unplug the unit. Make sure that the air
inlet grid openings and air outlets are unblocked
and let the hot air styler cool down for 10-15 min-
utes. After that you can switch it on again. Do not
block the air openings during operation of the hot
air styler and avoid getting of hair into the air inlet
grid openings.
CLEANING AND CARE
• Before cleaning unplug the unit and let it cool
down completely.
• Do not immerse the unit, the power cord and
the power plug into water or any other liquids.
VT-2533.indd 5
•
Do not use detergents, abrasives and any sol-
vents to clean the unit.
•
Clean the unit body with a soft, slightly damp
cloth and then wipe it dry.
• Wash the attachments (1, 9, 10) and curlers
(11) with warm water and dry them.
STORAGE
•
Let the unit cool down completely and clean it
before taking away for storage.
•
Never wind the power cord around the unit, as
this can damage the cord.
•
Keep the unit in a dry cool place out of reach
of children and disabled persons.
DELIVERY SET
Hot air styler – 1 pc.
Brush attachments – 2 pc.
Curlers attachment – 1 pc.
Curlers – 10 pc.
Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50/60Hz
Maximal power consumption: 1000 W
The manufacturer preserves the right to change
the specifications of the unit without a prelimi-
nary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
5
ENGLISH
08.02.2016 15:28:53