Installing The Sim Card - Crosscall TREKKER-X4 Kurzanleitung

INSTALLING THE SIM CARD

1.Check that your device is turned off
If not, turn the power off by pressing the On/Off button
2. Open the SIM tray using the SIM eject tool provided
a.Take the tool provided
b. Insert it into the hole, as shown below, to eject the SIM tray from its housing.
3. PULL OUT THE TRAY COMPLETELY WITH THE METAL SIDE FACING UPWARDS
4. INSERT THE SIM CARDS
A. INSERT THE SIM CARD, FACE DOWN, IN THE SMALLEST COMPARTMENT
B. IF YOU WISH, INSERT A SECOND SIM CARD (OR AN SD CARD UP TO
512GB), FACE DOWN, IN THE BIGGEST COMPARTMENT.
5. SLIDE THE TRAY BACK INTO THE PHONE
A.MAKE SURE THE CARDS ARE PROPERLY ALIGNED.
B.CHECK THAT THE TRAY IS PROPERLY ALIGNED WITH THE SLIT IN THE
PHONE WHEN YOU INSERT IT.
C.INSERT THE TRAY AND PUSH IT IN, AS INDICATED BELOW.
IMPORTANT: TO ENSURE THAT YOUR SMARTPHONE IS WATERTIGHT, MAKE
SURE THAT THE TRAY IS COMPLETELY INSERTED AND LOCKED.
CHARGING:
Be sure to fully charge your TREKKER-X4 before you use it for the first time with
the charger supplied.
3