Clutch Control - Husqvarna 2011 CR 125 Merkmale, Gebrauch, Wartung

HANDLEBAR COMMUTATOR (WR)
The left commutator has the following controls:
1) Engine stop button ( )
2) HI = ( ) Selection control High beam
LO = (
) Selection control of Low beam
3) TURN
= Activation of left turn indicators (self cancelling)
= Activation of right turn indicators (self cancelling)
To deactivate the indicator, press the control lever after
its returning to center.
4) HORN = ( ) Warning horn
5) LIGHTS
= Lighting control of lowbeams and high beam.
= Lighting control of position lights.
= Off
14
ENGINE STOP BUTTON (CR)
On the left side of the handlebar, near the clutch control, is lo-
cated the engine stop button (1).

CLUTCH CONTROL

The clutch lever is located on the left-hand side of the handlebar
and is protected against dirt filtering in. The lever support is
provided with adjusting screw (1) to regulate clutch wire free
play. The clutch
lever can be adjusted to suit your driving position.
CAUTION
Do not forget to tighten the screws (C) after
the adjustment.
A: To decrease clearance
B: To increase clearance
REAR BRAKE CONTROL
The rear brake control (1) is placed on the right-hand side of
the motorcycle. On models WR a stop switch, during the braking
action, causes the rear light to come on.
1
1