Changing Passwords And Configuring The Camera On The Wlan Network - Smartwares IAN 281517 Montage-, Bedienungs- Und Sicherheitshinweise

Changing passwords and configuring the
camera on the WLAN network (see Fig. E)
Note: Please refer to page 17 of the instructional CD and the follow-
ing pages for detailed instructions.
For additional camera settings, select the „
„System Information".
Select „Advanced" (IOS) or „Menu" (Android) and enter the de-
fault admin password „123456". Click „OK" to confirm.
Opening „Advanced" (IOS) or „Menu" (Android) for the first time
will open a window prompting you to enter a new admin pass-
word. You will need to enter a new password or you will be una-
ble to access the settings.
Note: We recommend selecting a complex password. A complex
password contains at least one uppercase letter (A, B, C, etc.) and
lowercase letters (a, b, c, etc.) and at least one number (1, 2, 3,
etc.). Special characters (&, @, =, +, etc.) may not be used.
To change the password at a later time, open the „Advanced Set-
tings" menu and scroll all the way up to „Admin Password". Then
enter your old password, followed by the new one. Enter the new
password again to confirm.
Scroll down until you see the field „Security Code". Select „Change".
Enter the default old password („123456") and select a new
password and repeat to confirm your entry. Click „OK" to confirm
your entry.
Scroll down until you see the „WiFi Settings" field. Select „Man-
age WIFI Network" (see Fig. G).
Once you have successfully entered your WLAN password the
camera will restart. Please disconnect the network plug from the
router when restarting.
" icon and, then
GB/MT 37