Camera Installation; Connecting The Camera - Smartwares C704IP.2 Bedienungsanleitung

Minimal system requirements:
CPU:
Memory:
Video card:
Supported OS:
Supported browsers:
Supported mobile OS:
Certification:
Warranty:
3.2. Main component parts
1. C704IP.2 camera
2. Camera base
3. Detachable antenna
4. 4 assembly screws and plugs
5. DC supply
6. Ethernet cable
7. Software CD-ROM
8. User's manual
3.3. Connections
1. Antenna port
2. Ethernet port
3. I/O port
4. DC connection
5. Audio connection
6. Reset opening

4. Camera installation

4.1. Connecting the camera

• Screw the antenna into the antenna port
• Connect the adapter cable to the DC connection of the camera
adapter plug into the power outlet.
• Connect the included ethernet cable to the network port of the camera
the other end of the ethernet cable to your router. The green LED on the ethernet port
will light up when the camera is connected to the network. The LED on the front of the
camera will also begin flashing.
You can now operate your IP Camera using your smartphone or PC. Go to section 4.2 for
use with smartphone and go to section 4.3 for installation on your PC.
4.2. Settings for smartphone use
! Attention! To use the "ELRO INSTALL" App, you need a smartphone with internet
access.
!
Attention! To scan a QR code, you need an APP that can scan barcodes.
To set up your camera using Android, go to section 4.2.1. To set up your camera using iOS,
go to section 4.2.2.
2.0 GHZ or higher
256 MB or higher
64 MB or higher
Windows 98/ME/2000/XP/Vista/7/8
IE6.0-10.0, Firefox, Safari, Google Chrome
iOS 4.3 and higher / Android 2.1 and higher
CE, FCC, RoHS, R&TTE
Limited 3-year warranty
1
2
.
3
. Then insert the
4
. Connect
5
19