Camera Setup - Smartwares IAN 281517 Montage-, Bedienungs- Und Sicherheitshinweise

Camera setup

Note: The screen shots may vary slightly due to software updates.
Download the „OMGuard HD" app from the App Store or Google
Play (see Fig. C).
In the app, select „Add new system" and „Scan" to select the
camera you wish to connect to the router. This will open a new
1
window with all the cameras available on the network. The camera
will have an alphanumeric code which also corresponds with the
„DID Code" printed on a label on the underside of the camera.
Compare the codes and select it in the display. For iOS devices,
select the correct DID code (if several codes appear) and select
„Join". For Android devices, select the correct DID code. Choose
a name for the camera and enter it under system name. Then enter
the default security code „123456" and press „save" (see Fig.
D). The camera will capture a still frame and show it in the display
along with the message „Connected". If the DID code does not
appear automatically, you may enter it manually. To do so, select
„DID".
36 GB/MT