Siemens Gigaset USB Adapter 300 Bedienungsanleitung Seite 19

Gigaset USB Adapter 300
u
You can connect the Gigaset USB Adapter 300 as a stick directly to a free USB
port on your PC (A).
u
You can connect the Gigaset USB Adapter 300 to a free USB port on your PC
via the USB cable supplied (B).
u
To optimally adjust the Gigaset USB Adapter 300 for operation in a fixed loca-
tion you can install it with the supplied stand (C).
To do so, proceed as follows:
ì
Open the stand. To do this, pull the front of the stand about 2 mm upwards
(C1-1) and then remove it forwards (C1-2).
ì
Push the USB cable from below through the stand (C1-3).
ì
Press the USB plug between the fixtures in the direction of the arrow. Make
sure that the logo on the plug is pointing forward (C1-4).
ì
Close the stand. Make sure that the clamps on the front of the stand snap in
(C1-5).
ì
Pass the cable through the channel in the bottom and insert it in a free USB
port on your PC (C2-6).
ì
Put the Gigaset USB Adapter 300 in the stand with the LEDs facing forward
(C2-7).
19