General Warnings; Transport And Handling; Warnings And Precautions - Zhermack hurrimix2 Handbuch

4.2.1 STANDARD SUPPLIES - Fig. C
As well as this Use and Maintenance Manual and the quick guide the
Hurrimix mixer is also supplied with:
2
EN
Components
12a. Power cable 230 V
12b. Power cable 115 V
12c. Power cable 230 UK
13. Containers for alginate mixing x2
14. Containers for plaster mixing x2
15. Set of spatulas
16. Pre-mix stick
17. Bottle with graduated measuring cup
(*) Order Code to be used when ordering spare parts.
4.2.2 WEIGHT AND OVERALL CLEARANCE
Overall clearance without packaging
Height (h)
Height with door open (max. h)
Width (l)
Depht (p)
Empty weight
ChAPTER 5: TRANSPORT AND hANDLING
5.1

GENERAL WARNINGS

Transport and storage conditions:
Temperature
Humidity
Pressure
In order to prevent injury/damage to persons/objects, pay great
care when handling the equipment, scrupulously complying
with all precautions and instructions contained in the following
paragraphs.
5.2 PACKAGING AND UNPACKING - Fig. D
All material is carefully controlled by the Manufacturer before delivery. On
receiving the equipment, make sure that it has not been damaged during
transport and that the packaging has not been tampered with, resulting in
missing parts. Should any damage or missing parts be noted, inform the
Dealer and the Carrier immediately by forwarding photographic evidence.
The packaging, made up of a cardboard box with expanded plastic internal
protections, contains:
• the Hurrimix 2 mixer;
• the material supplied (see par. 4.2.1);
• the Use and Maintenance Manual.
• the quick guide.
IMPORTANT: Always keep the original product packaging
throughout the guarantee period. You will need the
packaging if the product has to be returned to the Service
Centre for repairs or replacement in the event of
manufacturing defects or malfunction (with the exception
of wilful damage, negligence, failure to perform routine
maintenance or damage during transport). If you are not in
possession of the original packaging, contact Zhermack and
ask for instructions (possible repackaging costs will be
charged on delivery). The customer is responsible for all
costs associated with unsuitable packaging of the product
to be returned to the manufacturer. Zhermack is not liable
for faults, malfunctions or damage to the product deriving
from or consequent to the use of unsuitable packaging, or
packaging not of a quality equal to or better than the
packaging used for the original shipment.
5.3

TRANSPORT AND hANDLING

If the equipment must be moved:
1. disconnect the equipment from the electric point;
2. hold the equipment (see par. 6.5 Fig. 1), always keeping it in a vertical
position. Regarding this, pay attention to the weight and clearance of
the equipment (see par. 4.2.2), in order to prevent any type of damage
occurring due to the failure of considering these values;
3. pack the equipment in the original packaging. If this is not possible, take
all necessary precautions to protect the equipment from knocks and
drops, as the goods are transported at the owner's risk.
It is prohibited to grab Hurrimix
transport or for handling or any way differently from that
indicated.
The reference figures are present on pages 3, 4, 5 and 6 of this manual and in the product Quick Guide.
22
Q.ty Code*
1 XE2515375
1 XE2512376
1 XE2515376
1 XR0250802
1 XR0250804
1 XR0250820
1 XR0250830
1 XR0250840
cm. 31
cm. 50
cm. 27
cm. 32
Kg. 19
-20°C / +60°C
Max 80%
500 - 1060 mbar
mixer from the cover either for
2
• Failure to comply with the rules stated above relieve the
Manufacturer from any liability regarding equipment
malfunctioning and consequently makes the warranty null
and void.
• When shipping and/or delivering the equipment to an
Authorised After-Sales Centre always enclose a copy of the
purchase document and a copy of the properly filled-in
identification form. If the equipment is transported by carrier,
the Postal Service or rail, it is recommended to insure the
shipment.
• Before transporting the device, make sure the safety knobs
are in place and tightly fixed. Use the original packaging.
Failure to respect these precautions could result in damage
to the device.
5.4 DISPOSAL / DISMANTLING
Clean and disinfect the equipment and accessories before
disposal / dismantling.
When disposing of the packaging material the user must follow the
regulations in force in the country of use relative to the following materials:
• wood/paper: non-polluting materials, but must be re-cycled correctly;
• polystyrene/plastic: pollutant material, do not burn (toxic fumes) or
dispose of in the environment. Dispose of these materials in compliance
with the regulations in force in the country of use.
If the equipment is to be dismantled, the operator must be in charge
of dismantling, elimination and re-cycling of the following materials in
compliance with the EEC Directives and the laws in force in the country
of use:
• plastic parts; steel parts; glass parts; insulated electric cables; rubber parts.
• there are no toxic or corrosive substances.
Regarding the disposal of materials used for mixing, carefully follow that
specified on the labels of the individual products; in all cases, respect the
EEC Directives and Laws in force in the country of use.
The device must not be disposed of as urban waste. At the
end of its working life, it must be taken to a waste
separation and recycling centre in compliance with
European Directive no. 2012/19/UE or in accordance with
the legislation in force in the country of sale.
ChAPTER 6: INSTALLATION AND COMMISSIONING
6.1

WARNINGS AND PRECAUTIONS

Before carrying out installation, make sure that all safety conditions exist
and follow the indications given below carefully.
For greater clarity, the numbers stated in the figures positioned
near to the paragraph boxes correspond to the numbering of
the data in Chapter 3, regarding the "Description of the
equipment".
6.2 ACCEPTED ENVIRONMENTAL CONDITIONS
Unless stated otherwise, at the time of ordering, it is intended that the
equipment must be envisioned to function regularly in the following
environmental conditions:
Place of Use
Altitude
Working temperature
Humidity
Conditions different to those prescribed can cause anomalies or sudden
breakdown.
Lighting in the installation area of the equipment must be sufficient to
guarantee good visibility in all points of the equipment.
Luminosity not less than 200 lux must be guaranteed. The lighting must be
uniform without reflections, which could dazzle the operator.
The equipment itself cannot cause explosions or fire: the
equipment is not prepared and/or designed to operate in
environments with explosive atmosphere or with the risk of fire.
The working area lighting plant is an important factor for the
safety of persons and the quality of work. In Italy this subject is
governed by a Ministerial Decree that clearly determines the
average level of prescribed lighting. In other countries the
regulations in force are valid regarding accident-prevention and
hygiene in the workplace.
Indoors
Up to 2000 m (761,5 mbar)
From 10°C to 35°C
Max 80%
hurrimix 2