Disposal; Electromagnetic Compatibility (Emc) - RIDGID RS-570 Bedienungsanleitung

Disposal

Parts of these tools contain valuable materials and
can be recycled. There are companies that spe-
cialize in recycling that may be found locally. Dis-
pose of the components in compliance with all
applicable regulations. Contact your local waste
management authority for more information.
For EC Countries: Do not dispose
of elec trical equipment with house-
hold waste!
According to the European Guide line
2012/ 19/EU for Waste Elec trical and
Electronic Equipment and its imple -
men tation into national legislation, electrical
equipment that is no longer usable must be col-
lected separately and disposed of in an environ-
mentally correct manner.
Electromagnetic
Compatibility (EMC)
The term electromagnetic compatibility is taken
to mean the capability of the product to function
smoothly in an environment where electromag-
netic radiation and electrostatic discharges are
present and without causing electromagnet in-
terference to other equipment.
These tools conform to all applicable
NOTI E
EMC standards. However, the possibility of it
causing interference in other devices cannot be
precluded. All EMC related standards that have
been tested are called out in the tool's technical
document.
999-995-148.08_REV. B
RS-570 Reciprocating Saw
15