Werbung
The procedure for working on the single tabs is explained below.
"PRESETS" tab
For each of the 8 fixed scenes available on the enclosure, you can enter the values of the DMX channels. To modify the values of
the channels, double click on the required position of the table then key in the new channel value, between 0 (channel OFF) and
255 (channel at maximum value).
"PROGRAM 1" (2, 3, 4) tab
The Program 1 tab allows you to specify:
-
the number of program scenes (up to a maximum of 16), keying in the value in the Number of Scenes field; in the table
below, the non-envisaged scenes have a grey background and cannot be selected or modified;
-
the pause time of each scene (by clicking on the table above, and choosing the required time from the list);
-
the fade time to the next scene (by clicking on the table above, and choosing the required time from the list);
-
the values of the DMX channels for each scene (by clicking on the table below, in line with the required channel and scene,
and keying in a value between 0 (channel OFF) and 255 (channel at maximum value).
The Program 2 , Program 3 , Program 4 tabs allow you to set programs 2, 3, 4 in the same way.
21
Werbung
