Installation - Ingersoll-Rand 2115Ti Bedienungsanleitung

Ingersoll-Rand No. 10 Oil
Ingersoll-Rand No. 115-1LB for routine external lubrica-
tion of the impact mechanism through the Hammer Case
Grease Fitting.
AIR SUPPLY (FROM COMPRESSOR)
LUBRICATION

INSTALLATION

Main Line(s) Inner Ø
to be 3X Size of
Air Tool's Inlet Ø
To Air
System
To Air
Tool
Emergency L
Shut-Off
Valve
Lubricator Regulator
FRL
Drain Regularly
AIR & HOSE CONNECTIONS
3/8" COUPLER OR LARGER
(I-R PART NO. MSPF33)
I-R PART NO. MSPM32 (MALE)
I-R PART NO. MSPF32 (FEMALE)
3/8" AIR HOSE
WITH 1/4" NPT
FITTINGS
Use Ingersoll-Rand No. 105-1LB when disassembling and
assembling the impact mechanism.
Always use an air line lubricator with these tools. We rec-
ommend the following Filter-Regulator-Lubricator (FRL)
Unit:
Inside USA use FRL Unit # C18-03-FKG0-28
Outside USA use FRL Unit # C18-C3-FKG0
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool's Inlet Ø
R
F
Filter
Compressor
3
(Dwg. TPD905-2)
I-R PART NO. MSPM32
3/8" COUPLER OR
LARGER (I-R PART
NO. MSCF32)
(Dwg. TP2132)