Room Controller Be-Sc-2 - Installation - Solvis BE-SC-2 Montageanleitung

Room controller BE-SC-2 – Installation
EN
Safety notes
Read these instructions thoroughly
before installing/starting up the sys-
tem/unit and observe the safety notes.
Intended use
The room controller is used for measur-
ing room or swimming pool tempera-
tures in the range of 0 to +50°C and for
remote control of SolvisControl as
described in these instructions.
Operating this unit for any other pur-
pose is prohibited. Exceptions require
Warranty and exclusion of liability
We assume liability as described in our
general terms and conditions. Fur ther-
more, we decline all responsibility for
damage to the system/unit or resulting
damages, if:
• installation and startup have not been
carried out by a specialised company
recognised by Solvis,
6
Solvis is not liable for damage
resulting from non-observance of
these instructions.
express written approval or statement
from Solvis in advance.
Keep dust and contamination
away from the unit.
• the system/unit is being used or
operated incorrectly,
• the prescribed maintenance was not
carried out,
• maintenance, changes or repairs have
been performed on the system/unit
by someone who is not a specialist.
L 80-M – Subject to technical changes 08.16