Connection To An Electric Strike Plate With Additional Power Supply; Activation And Use Of Badges; Initialisation - avidsen Ylva 3 series Handbuch

ADDITIONAL INTERCOM PANEL FOR THE VIDEOPHONE
C - INSTALLATION
IMPORTANT: if you have trouble opening the lock, which may be caused by a large distance between the
screen and the intercom panel, for example, we recommend that you connect it to a separate power supply.
If you use a separate power supply, you must connect a 12 V relay (not supplied) to control it from the video
intercom, as illustrated.

2.2.3 - CONNECTION TO AN ELECTRIC STRIKE PLATE WITH ADDITIONAL POWER SUPPLY

3.3 - ACTIVATION AND USE OF BADGES

Three types of badges are included: the red administrator badge, the grey add badge and the blue user
badges.

3.3.1 - INITIALISATION

With the video doorkeeper powered on, press on the "RESET" button on the back of the intercom panel.
EN
5
13
14
9
Relay with 12 V coil
and NO contact
ref. 104765
12 VDC
230 VAC
EN EN
11