Adding User Badges; Deactivating All Badges; Selecting The Action Associated With The User Badges - avidsen Ylva 3 series Handbuch

The intercom panel will beep 4 times.
Within the
administrator badge (red) in front of the name
plate.

3.3.2 - ADDING USER BADGES

Pass the add badge (grey) in front of the name
plate.
The intercom panel will beep once. Wait 10 seconds for the intercom panel to exit add mode.

3.3.3 - DEACTIVATING ALL BADGES

Pass the administrator badge in front of the name plate to deactivate all of the recognized badges.
(including the add badge).

3.3.4 - SELECTING THE ACTION ASSOCIATED WITH THE USER BADGES

The RFID badges enable both the electric strike plates and the door controls to open. The function is
selected according to how long the RFID badge is held under the scanner.
If scanned briefly, the electric strike plate opens. If held for a longer period (3 secs), the door control
opens
12
EN
next 10 seconds,
ADDITIONAL INTERCOM PANEL FOR THE VIDEOPHONE
Within the next 10 seconds, pass the add badge
pass the (grey) in front of the name plate.
The intercom panel will beep 4 times.
Within the next 10 seconds, pass one of the user
badges in front of the name plate.
C - INSTALLATION
EN