Calls; Monitoring Mode; Use Of An Electric Strike Plate Or An Automated Gate Mechanism; Photo Playback - avidsen 112263 Bedienungsanleitung

D - CONFIGURATION
2 - CALL
When the monitor is in standby mode, a press on the
call button on the intercom panel will simultaneously
activate the image display and the doorbell ring on
the monitor.
You then have 60 seconds to respond to the visitor
by pressing on the
reply, the monitor will revert to standby mode and
switch off after 60 seconds.
To end the conversation, press on the
again.

3 - MONITORING MODE

When the monitor is in standby mode, you can
initiate communication with the intercom panel
without an outside call being made. Press the
button when the screen is switched off to activate
the image for 60 seconds. You can force standby
mode by pressing the
12
EN
button. Should you not
button
button twice.
COLOUR VIDEO INTERCOM
4 - USE OF AN ELECTRIC STRIKE PLATE OR
AN AUTOMATED GATE MECHANISM
When the monitor is on, you can open a strike plate
or call for the automated gate to be opened if these
are connected to the intercom panel.
When the monitor is on, press the
unlock the strike plate connected to the intercom
panel or to call for the automated gate to be opened.

5 - PHOTO PLAYBACK

Your video intercom system automatically takes a
photo each time a call is made from the intercom
panel. The monitor can record up to 100 photos,
and once the memory is full, the oldest photo will be
erased to make space for a new one at the next call.
To view the photos in memory:
- When the monitor is in standby mode, press the
button to switch on the monitor
- Press on the button again to display the
latest photo taken
- One press on the
through the photos from newest to oldest
- One press on the
through the photos from oldest to newest
- To exit photo playback, press on the
again. Should there be no button press, the
monitor reverts to standby mode after 60
seconds.
button to
button allows you to scroll
button allows you to scroll
button