Connections - avidsen Ylva 3 series Handbuch

Then screw the intercom panel to the hood with the screw provided.
Put on the name label.

2 - CONNECTIONS

• Do not increase the number of insulating screw joints or connectors on the connecting wire between the
intercom panel and the monitor
• Keep the connecting wire between the intercom panel and the monitor more than 50 cm away from any
electromagnetic interference (230 V cable, WiFi device, microwave ovens, etc.)
• You can connect and use the electric strike plate (not provided) with your intercom panel, with or
without mechanical memory.
Between the monitor and the intercom panel (100m maximum)
To ensure good audio and video quality, it is advised to not use more than 100m of cable between the
intercom and the intercom panel. Connect the wires as follows (incorrect wiring can damage the intercom
panel).
8
EN
ADDITIONAL INTERCOM PANEL FOR THE VIDEOPHONE
C - INSTALLATION
EN