Operation - SOLAC CE4550 Gebrauchsanleitung

5 Selector for filter position and emptying dregs
6 Filter holder flap
7 Lower plastic filter holder base
8 Water tank
9 Steam nozzle control
10 Steam nozzle
11 Steam nozzle protector
12 Water level viewer
13 Coffee outlet holes
14 Cup-heater tray
15 Cup-holder tray
16 Tank lid
17 Sugar cube container
18 Dispenser spoon
3 TIPS
• Before using the coffee machine for the first time, we recommend
allowing the equivalent of 8-10 cups of water to run through the filter
holder (with no coffee in the filter). This completely cleans the entire
system.
• Use the dispenser spoon (18) to adjust the correct amount of coffee. One
spoonful is equivalent to one cup of coffee.
• If the coffee seems to be coming out too slowly, the grind is too fine. We
recommend that you avoid using extra-fine ground coffee.

4 OPERATION

A. COFFEE
A. Preparing coffee
1 Fill the water tank. To do this, remove the tank (8) from the rear of the
coffee maker or open the lid (16) and pour the water in.
2 Plug the coffee maker into the mains and press the switch (1). The
orange pilot light will come on and change to green once the appliance
is ready to make the coffee.
3 If you want to make sure your first cup of coffee is hot, insert the filter-
holder without coffee in it and let one or two cups of hot water run out in
order to warm the components of the coffee-maker. We also recommend
that you put the cups to be used on the cup-heater tray (14) so as to
warm them up during this operation, providing creamier coffee.
TIPS
en
11