Safety Symbols; General Safety Information; Work Area Safety; Electrical Safety - RIDGID micro CA-100 Bedienungsanleitung

Safety Symbols

In this operator's manual and on the product, safety symbols and signal words are used to
communicate important safety information. This section is provided to improve understand-
ing of these signal words and symbols.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death
DANGER
or serious injury.
WARNING WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION CAUTION indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
NOTICE
NOTICE indicates information that relates to the protection of property.
This symbol means read the operator's manual carefully before using the equipment.
The operator's manual contains important information on the safe and proper operation
of the equipment.
This symbol means always wear safety glasses with side shields or goggles when han-
dling or using this equipment to reduce the risk of eye injury.
This symbol indicates the risk of hands, fingers or other body parts being caught or
wrapped in gears or other moving parts.
This symbol indicates the risk of electrical shock.
General Safety
Information
WARNING
Read all safety warnings and instructions.
Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/
or serious injury.
SAVE THESE INSTRUCTIONS!
The CE declaration of conformity (890-011-
320) will accompany this manual as a sepa-
rate booklet when required.

Work Area Safety

Keep your work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate equipment in ex-
plosive atmospheres, such as in the
presence of flammable liquids, gases
or dust. Equipment can create sparks
which may ignite the dust or fumes.
Keep children and by-standers away
while operating equipment. Distrac-
tions can cause you to lose control.
micro CA-100 Inspection Camera

Electrical Safety

Avoid body contact with earthed or
grounded surfaces such as pipes, radi-
ators, ranges and refrigerators. There
is an increased risk of electrical shock if
your body is earthed or grounded.
Do not expose equipment to rain or
wet conditions. Water entering equip-
ment will increase the risk of electrical
shock.

Personal Safety

Stay alert, watch what you are doing
and use common sense when operat-
ing equipment. Do not use equipment
while you are tired or under the influ-
ence of drugs, alcohol or medication.
A moment of inattention while operat-
ing equipment may result in serious per-
sonal injury.
Do not overreach. Keep proper foot-
ing and balance at all times. This en-
ables better control of the power tool in
unexpected situations.
3