Inhaltsverzeichnis
Werbung
Low voltage
Cause
The mains voltage falls below the permitted limiting value.
Remedial action
No button actuations are possible. When the mains
voltage reaches the stipulated value again, the warning
message goes out. If the warning message lasts for
longer, inform the energy supply company.
Appliance self test
Before you call customer service, conduct a self test
on the appliance.
Switch off the appliance and wait 5 minutes.
D
Keep the door closed during this time.
Switching on the appliance.
D
At the same time, press the setup button
D
.
alarm button
for 5 seconds.
The self test programme starts. Various messages
appear in the facia one after the other.
If an error is established during the appliance self test,
the
symbol appears in the fascia and an error
l
message (e.g.
E04
= sensor error) is displayed.
Inform the customer service of these error messages.
If no error is established during the appliance self test,
the preset temperature appears in the fascia after the test
has ended.
W
and the
39
Werbung
Kapitel
Inhaltsverzeichnis
