Items Supplied; Unpacking And Connecting; Using The Massage Mat In A Car; Using The Massage Mat At Home - ULTIMATE SPEED IAN 270074 Bedienungsanleitung

BB&3(B$XWRPDVVDJHB%ERRN 6HLWH  'RQQHUVWDJ  -XOL    
against the appliance being switched
on accidentally.
DANGER in road traffic
~ In the case of side airbags, the middle
and upper fastening strap must not be
used.
~ If you have any questions about the air-
bag, please consult your car manual or
ask at your car workshop.
~ Never use the appliance in the car
while it is in motion. It may cause a dis-
traction and endanger traffic safety. If
you wish to change the settings, stop
the vehicle.

4. Items supplied

1 car massage mat|1
1 mains adapter|13
1 car lead|12
1 set of user instructions
5. Unpacking and con-
necting
Unpacking
1. Remove all parts from the packaging.
2. Check that all parts are present and in-
tact.
5.1 Using the massage mat
in a car
1. Place the massage mat|1 on the car
seat.
2. Fasten the massage mat|1 carefully
with the securing straps|2.
3. Plug the car lead|12 into the cigarette
lighter or another suitable 12 V con-
nection.
4. Plug the power plug|11 on the car
lead|12 into the power socket|10.
36 GB
5.2 Using the massage mat
at home
1. Place the massage mat|1 on a suitable
chair or armchair.
2. Fasten the massage mat|1 carefully
with the securing straps|2.
3. Plug the mains adapter|13 into a
mains socket that complies with the
technical data.
4. Plug the power plug|11 on the mains
adapter|13 into the power socket|10.

6. Operation

The remote control|9 has background illumi-
nation. If this does not come on, the back-
ground illumination will be switched on first
when button|5,|6 or|7 is pressed for the first
time. Only when the background illumina-
tion is on does the button have the function
described below. The background illumina-
tion goes off again after about 5 seconds.
If you press the OFF button|4, the appliance
switches off immediately.
6.1 Switching the appliance
on and off
1. To switch the appliance on, press the
ON button|6.
The LCD display|3 shows "MODE 0".
As soon as the appliance is switched
on, the timer will automatically start
running at 30 minutes. The remaining
time is shown in the LCD display|3.
To protect the appliance from being ac-
cidentally left on, it automatically
switches off again after 30 minutes.
2. To switch the appliance off before the
30 minutes has expired, press the OFF
button|4.