Use; Description; Scope Of Delivery - SATA air star C Betriebsanleitung

■ To remove impurities in the breathing air that must stem from the
compressor, an additional SATA filter 444 with pressure gauge [10]
must be mounted between the activated carbon filter and the belt unit or
between the SATA filter 464 [9] and the air network.
General
■ The half mask may not be used by people with beards or side-burns in
the vicinity of the sealing line.
■ Comply with the local regulations on safety, occupational health & safe-
ty and environmental protection.
■ Heed the accident prevention regulations.

3. Use

Intended Use
The half mask acts as a highly effective health protection for painters
against organic gases and vapours (boiling point > 65 °C) and / or dusts,
e.g. solvent fumes, paint mists and sander dust.
Incorrect use
The half mask is not intended for use in ambient atmospheres subject to
radiation or heat.

4. Description

The ventilated half mask serves to supply the wearer with clean breathing
air and consists of the main components:
■ Ventilated half mask
■ Belt unit with activated carbon adsorber, control valve, compressed air
connection and flow rate indicator
Alternative
■ Belt unit with control valve and compressed air connection

5. Scope of Delivery

Standard version
■ Ventilated half mask with head straps and bands
■ Belt unit with mounted activated carbon adsorber, control valve and flow
rate indicator
■ Operating Instructions
Alternative model
■ Ventilated half mask with head straps and bands
■ Belt unit with control valve and compressed air connection
■ Operating Instructions
Operating manual SATA air star C
EN
105