Use Of The Oven; User Interface Description; Product Setting; First Use - Hoover VISION HOZP9177BI Bedienungsanleitung

3. Use of the Oven

3.1 User interface description

1. Main switch on/off
2. TFT touch interface
(Figure 1)
Figure 1

3.2 Product Setting

● At first launch you need to follow an installation process in order to
be able to use the oven. Press ON/OFF to go ahead. (Figure 2)
● Select the language from the drop down menu.
● Press OK to go ahead.
● Scroll on the TFT touch interface or press the arrows to show more
languages.
NOTES:
● After 10min of inactivity (excluding during cooking and in remote
control) TFT goes in standby mode and touch screen is switched off.
To wake up TFT press on the ON/OFF button TFT will go back to
previous screen.
● Set the time by scrolling circularly on the red dot. Press OK to go
ahead.
● The installation process is completed.
● Press OK then go to home page in order to start to use the oven.
● Sliding on the red dot implies action on highlighted red number.
● It is suggested to use the total area of the finger to press on display
Figure 2

3.3 First Use

PRELIMINARY CLEANING
●
Clean the oven before using for the first time.
● Wipe over external surfaces with a damp soft cloth.
● Wash all accessories and wipe inside the oven with a solution of hot
water and washing up liquid.
●
Set the empty oven to the maximum temperature and leave on for about
1 hour, this will remove any lingering smells of newness.

3.4 Operating In Manual Mode

In this mode, it is possible to access to:
● Cleaning System – please view chapter 3.9
● Functions – please view chapter 3.7
● Special Functions – please view chapter 3.9
Below, a detail related to the access to Functions section.
● Press the Manual Mode tab to set a cooking in 3 simple steps. (Figure3)
● Select the desired function from the MENU.
● Scroll to select the desired temperature. Press OK to go ahead or BACK
to return to the cooking functions selection. (Figure 4)
● Scroll to select the cooking duration. Press OK to begin the cooking or
BACK to return to the temperature setting. (Figure 5)
2
1
NOTES:
● In this screen it is possible to adjust bellow paramerts by entering the
options menu.
• exclude preheating (set by default)
• set delayed start
● When a cooking cycle is running you can:
• change the temperature
• change the cooking duration
• press STOP to finish cooking
Figure 3
CONVECTION + FAN
Figure 4
CONVECTION + FAN
Figure 5

3.5 Operating In My Chef Mode

Figure 6
The detailed description is given in the "3.7 Function Descriptions table".
(Figure 6)

3.6 Operating In Recipes Mode

Figure 7
The detailed description is given in the "3.7 Function Descriptions table".
(Figure 7)
EN 06