System Connections; System Connection Via A Lan - Sony PCS-G50 Bedienanleitung

System Connections

This section describes the typical system connections.
Notes
• Be sure to turn off all the equipment before making any connections.
• Do not connect/disconnect the camera cable with the power on. Doing so may damage
the Camera Unit or Communication Terminal.
• For safety, do not connect the 100BASE-TX/10BASE-T connector to a network that
applies an excess voltage via the 100BASE-TX/10BASE-T connector.

System Connection via a LAN

Microphone PCS-A1
to
AUDIO
OUT
to DC19.5V
Audio
connecting
cable*
to audio input
* supplied
** not supplied
to MIC 1
to VIDEO IN
to VIDEO to 100BASE-TX/
OUT 10BASE-T
MONITOR
MAIN
S-video
UTP cable (category 5, straight)**
connecting
cable*
to S-video
input
PCSA-CG70/CG70P
Camera Unit
to TERMINAL
Camera cable*
PCS-PG50/PG50P
Communication Terminal
PCS-AC19V6
AC adaptor
Power cord*
to a wall outlet
TV monitor**
to a wall outlet
System Connections
to LAN
21
GB