Sony PCS-G50 Bedienanleitung Seite 43

2
Press the
press the PUSH ENTER button, or press the
The System enters standby mode, and the POWER indicator on the
Communication Terminal lights in orange.
When the System is in this status, you can turn it on with the @/1 button on the
Remote Commander.
If the system receives a call, the standby mode is automatically canceled and
the system is connected.
To turn off the power
Open the front panel of the Communication Terminal, and set the power switch
on the right side to the off position (
for the videoconference.
14
GB
Ending the Conference
B or b button on the Remote Commander to select "OK", then
@ 1
/ button
B/b
and PUSH ENTER buttons
@ / 1 button.
POWER indicator (Not lit.)
POWER indicator (Lights in orange.)
a ). And then turn off other equipment used