System Connections; System Connection Via A Lan - Sony PCS-G70 Bedienanleitung

System Connections

This section describes the typical system connections.
Notes
• Be sure to turn off all the equipment before making any connections.
• Do not connect/disconnect the camera cable with the power on. Doing so may damage
the Camera Unit or Communication Terminal.
• For safety, do not connect the 100BASE-TX/10BASE-T connector to a network that
applies an excess voltage via the 100BASE-TX/10BASE-T connector.

System Connection via a LAN

PCS-PG70/PG70P
Communication
Terminal
MCU VIDEO OUT
1 2 3 4
DC 19.5V
IR OUT
AUX CONTROL
1 2
to
AUDIO
OUT
to DC19.5V
Audio
connecting
cable*
to audio input
* supplied
** not supplied
PCSA-CG70/CG70P Camera Unit
TERMINAL VISCA OUT
to TERMINAL
Camera cable*
to CAMERA UNIT
AUDIO OUT AUDIO IN MAIN
(MIXED) AUX LINE CAMERA AUX IN
MIC
(PLUG IN POWER)
1 2
5
WHITE 100BASE-TX/
1 2
BOARD 10BASE-T
EC-MIC RGB OUT
CTRL-S 1 2
AUX MONITOR
VIDEO OUT
to VIDEO to 100BASE-TX/
OUT 10BASE-T
MONITOR
MAIN
S-video
UTP cable (category 5, straight)**
connecting
cable*
to S-video
input
SUB
CAMERA AUX IN
DSB
ISDN UNIT
PCS-AC19V6
AC adaptor
TV monitor**
to a wall outlet
Power cord*
to a wall outlet
to LAN
System Connections
19
GB